taiyangnews 07月16日 21:28
Qn-SOLAR At Intersolar: TOPCon Modules For Europe
index_new5.html
../../../zaker_core/zaker_tpl_static/wap/tpl_guoji1.html

 

在Intersolar Europe 2025展会上,Qn-SOLAR展示了其针对欧洲光伏市场的新型TOPCon光伏组件。公司推出了基于182 mm (M10) 和182 × 210 mm (G12R) 尺寸TOPCon电池的两个新型号。这些组件专为欧洲分布式发电(DG)市场设计,具有高功率输出和效率,并经过认证,能够承受极端环境条件。M10组件提供15年产品质保,而G12R组件提供20年质保,两者均享有长达30年的功率衰减保障,并由第三方保险公司承保。

💡Qn-SOLAR推出了两款新型TOPCon光伏组件,分别基于182 mm (M10) 和182 × 210 mm (G12R) 尺寸的电池。

⚡️QNN182-HG-54型号采用M10尺寸半片电池,最大功率输出430W,效率高达22.02%,尺寸为1,722 × 1,134 × 30 mm,重24 kg;QNN210R-HG-54型号采用G12R尺寸半片电池,功率输出高达510W,效率22.93%,尺寸为1,961 × 1,134 × 30 mm,重27.5 kg。

💪两款组件均宣称比p型PERC组件的发电量高出20%,并专为欧洲分布式发电(DG)市场设计,通过了极端环境测试,可承受重度积雪和强风。

🛡️M10组件提供15年产品质保,G12R组件提供20年产品质保,两者在首年光致衰减(LID)低于1%后,30年内的年功率衰减均低于0.4%,并由第三方保险公司承保,如Ariel Re。

Multiple Chinese PV module manufacturers featured their latest product lineups aimed at the promising European PV market during Intersolar Europe 2025. Qn-SOLAR, a Shanghai-headquartered TOPCon PV module maker, was one of them.  

According to the company’s press release, its booth showcased 2 new models, based on 182 mm (M10) and 182 × 210 mm (G12R) size TOPCon cells, respectively.  

Module Showcase 

The latest QNN182-HG-54 model, rated for a maximum power output of 430 W and an efficiency of up to 22.02%, is built with 108 pieces of M10-size half-cells. Measuring 1,722 × 1,134 × 30 mm and covered with 2 mm front and rear glass, the module weighs 24 kg. The company states this module is also available in a 35 mm frame-based variant, as mentioned in the datasheet. 

The QNN210R-HG-54 model, equipped with 108 G12R size half-cells, offers a power output and efficiency of up to 510 W and 22.93%, respectively. It is larger than the module mentioned above, with dimensions of 1,961 × 1,134 × 30 mm, and it weighs 27.5 kg.  

Without specifying the bifaciality limit of either module, the company claims these models yield up to 20% higher power, attributed to their bifaciality factor, compared to their p-type PERC-based counterparts. 

The company promotes both modules as suitable for Europe’s distributed generation (DG) segment. It adds that these are certified for extreme environmental events, like heavy snowfall and high wind flow, exerting up to 5,400 Pa and 2,400 Pa static mechanical load, respectively. The company claims these modules can withstand up to 25 mm-sized hailstones falling at a speed of 23 m/s.  

According to datasheets, the M10 size cell-based module is offered with a product warranty of 15 years, whereas the G12R counterpart is offered with a warranty of 20 years. Following the first year’s light-induced degradation (LID) at less than 1%, the company claims an annual power attenuation of less than 0.4% for up to 30 years for both modules. Qn-SOLAR adds that these performance warranties are insured by third-party insurers, such as Ariel Re. 

Fish AI Reader

Fish AI Reader

AI辅助创作,多种专业模板,深度分析,高质量内容生成。从观点提取到深度思考,FishAI为您提供全方位的创作支持。新版本引入自定义参数,让您的创作更加个性化和精准。

FishAI

FishAI

鱼阅,AI 时代的下一个智能信息助手,助你摆脱信息焦虑

联系邮箱 441953276@qq.com

相关标签

Qn-SOLAR 光伏组件 TOPCon Intersolar Europe
相关文章