Noise pollution is becoming increasingly common in society today, impacting both humans and wildlife. While loud noises can be an inconvenience, if it’s something that happens regularly, it can have an adverse effect on human health that goes beyond a mild irritation.
As such noise pollution gets worse, researchers are working to mitigate its impact through new sound absorption materials. A team headed up the Agency for Science, Technology and Research (A*STAR) in Singapore has now developed a new approach to tackling the problem by absorbing sound waves using the triboelectric effect.
The World Health Organization has defined noise pollution as noise levels as above 65 dB, with one in five Europeans being regularly exposed to levels considered harmful to their health. “The adverse impacts of airborne noise on human health are growing concern, including disturbing sleep, elevating stress hormone levels, inciting inflammation and even increasing the risk of cardiovascular diseases,” says Kui Yao, senior author on the study.
Passive provides the best route
Mitigating noise requires conversion of the mechanical energy in acoustic waves into another form. For this, passive sound absorbers are a better option than active versions because they require less maintenance and consume no power (so don’t require a lot of extra components to work).
Previous efforts from Yao’s research group have shown that the piezoelectric effect – the process of creating a current when a material undergoes mechanical stress – can convert mechanical energy into electricity and could be used for passive sound absorption. However, the researchers postulated that the triboelectric effect – the process of electrical charge transfer when two surfaces contact each other – could be more effective for absorbing low-frequency noise.
The triboelectric effect is more commonly applied for harvesting mechanical energy, including acoustic energy. But unlike when used for energy harvesting, the use of the triboelectric effect in noise mitigation applications is not limited by the electronics around the material, which can cause impedance mismatching and electrical leakage. For sound absorbers, therefore, there’s potential to create a device with close to 100% efficient triboelectric conversion of energy.
Exploiting the triboelectric effect
Yao and colleagues developed a fibrous polypropylene/polyethylene terephthalate (PP/PET) composite foam that uses the triboelectric effect and in situ electrical energy dissipation to absorb low-frequency sound waves. In this foam, sound is converted into electricity through embedded electrically conductive elements, and this electricity is then dissipated into heat and removed from the material.
The energy dissipation mechanism requires triboelectric pairing materials with a large difference in charge affinity (the tendency to gain or lose charge from/to the other material). The larger the difference between the two fibre materials in the foam, the better the acoustic absorption performance due to the larger triboelectric effect.
To understand the effectiveness of different foam compositions for absorbing and converting sound waves, the researchers designed an acoustic impedance model to analyse the underlying sound absorption mechanisms. “Our theoretical analysis and experimental results show superior sound absorption performance of triboelectric energy dissipator-enabled composite foams over common acoustic absorbing products,” explains Yao.
The researchers first tested the fibrous PP/PET composite foam theoretically and experimentally and found that it had a high noise reduction coefficient (NRC) of 0.66 (over a broad low-frequency range). This translates to a 24.5% improvement in sound absorption performance compared with sound absorption foams that don’t utilize the triboelectric effect.
On the back of this result, the researchers validated their process further by testing other material combinations. This included: a PP/polyvinylidene fluoride (PVDF) foam with an NRC of 0.67 and 22.6% improvement in sound absorption performance; a glass wool/PVDF foam with an NRC of 0.71 and 50.6% improvement in sound absorption performance; and a polyurethane/PVDF foam with an NRC of 0.79 and 43.6% improvement in sound absorption performance.
All the improvements are based on a comparison against their non-triboelectric counterparts – where the sound absorption performance varies from composition to composition, hence the non-linear relationship between percentage values and NRC values. The foams also showed a sound absorption performance of 0.8 NRC at 800 Hz and around 1.00 NRC with sound waves above 1.4 kHz, compared with commercially available counterpart absorber materials.
When asked about the future of the sound absorbers, Yao tells Physics World: “We are continuing to improve the performance properties and seeking collaborations for adoption in practical applications”.
The research is published in Nature Communications.
The post Triboelectric device reduces noise pollution appeared first on Physics World.
